Harjattomat DC-moottorinohjaimet
Tiedostot
Nimikkeet tässä ryhmässä
![EM-106A Harjaton ohjain](/files/cache/6cb5d0546fe6b3402a7d3d8f48428742_f112.jpg)
EM-106A OHJAIN HARJATTOMILLE DC-MOOTTOREILLE 12-24V 7A
- Kolmivaihelähtö
- Suunnanvaihto
- Hall-anturi syöttö ja tulot
- Sopii 60 tai 120° kommukoinnille
- Aseteltava virtaraja
- Suora-ajo tai takaisinkytketty ajo
- Oma sulake
- Sopii kiskoasennuspohjaan
- Yhteensopiva EM-106:n kanssa
- Paranneltu virtarajan toiminta
![EM-151B Harjaton ohjain](/files/cache/ea009aa857282cdf40f7fa29e8ad29f8_f124.jpg)
EM-151B HARJATTOMAN DC MOOTTORIN OHJAIN 12-24V 25A
- Kolmivaihelähtö
- Normaali tai takaisinkytketty toiminta
- Kontrolloitu suunnanvaihto
- Erilaisia jarrutustapoja
- 60° or 120° kommutointi
- Mahdollisuus ±10V ohjaukseen
- Vika lähtö
- Hyvä hyötysuhde
- Lämpösuoja
- Asennettavissa kiskoasennuspohjaan
![EM-206 Harjaton ohjain](/files/cache/eb3369fdc82ff2cbdb9b42a74ff17f91_f142.jpg)
EM-206 OHJAIN HARJATTOMILLE DC-MOOTTOREILLE 12-36V 10A
- kolmivaihelähtö
- portaaton nopeudensäätö
- suunnanvaihto
- jarrutus
- optiona ±10V ohjaus
- hall-anturi syöttö ja tulot
- sopii 60 tai 120° kommutoinnille
- aseteltava / ohjattava virtaraja
- vikalähtö
- avoin tai suljettu silmukka -toiminta
- hyvä hyötysuhde
- sopii kiskoasennuspohjaan
![EM-206-48 Harjaton ohjain](/files/cache/712471801be86fd38c4e4e9fd4f25078_f143.jpg)
EM-206-48 OHJAIN HARJATTOMILLE DC-MOOTTOREILLE 20-56V 5A
- kolmivaihelähtö
- portaaton nopeudensäätö
- suunnanvaihto
- jarrutus
- optiona ±10V ohjaus
- hall-anturi syöttö ja tulot
- sopii 60 tai 120° kommutoinnille
- aseteltava / ohjattava virtaraja
- vikalähtö
- avoin tai suljettu silmukka -toiminta
- hyvä hyötysuhde
- sopii kiskoasennuspohjaan
![EM-269A Harjaton ohjain](/files/cache/97f4c5834b538c293c3ba10856dde54f_f519.jpg)
EM-269A BRUSHLESS DC-MOTOR DRIVER 12-35V 2A
- Only for motors with hall sensor
- Three phase output
- Speed adjustment
- Current limit and trip.
- Open/closed loop modes
- Settable Indication output
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
![EM-291A Harjaton ohjain](/files/cache/0abd3cb3b5cfd1a88143bcb07add019f_f522.jpg)
EM-291A BRUSHLESS DC-MOTOR DRIVER 12-35V 4A
- Only for motors with hall sensors
- Three phase output
- Speed adjustment
- Current limit and trip
- Open/closed loop modes
- Settable indication output
- Good efficiency
- Low current version available ( -LC )
- Low EMC emissions
- DIN-rail mountable
![EM-316A Harjaton ohjain](/files/cache/110793c888fe67a301e09e3923ad22a5_f504.jpg)
EM-316A Harjaton moottoriohjain 12-35V 10A
- ONLY to the motors with hall sensors
- Three phase output
- Speed and torgue adjustment
- Open/closed loop modes
- Dynamic braking
- Current limit and trip
- Fault and overcurrent outputs
- 60° / 120° commutation options
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- EM-316A is compatible with EM-316
- Added EM-A1 card slot for ±10V control
- Rpm-pulse output option ( prog v1.5 )
![EM-346 Harjaton ohjain](/files/cache/e95fe2d00363dea99cab2c8bc5b18df3_f531.jpg)
EM-346 Harjaton moottoriohjain 12-35V 10A
- ONLY to the motors with hall sensors
- Three phase output
- Speed and torque adjustment
- Open/closed loop modes
- Regenerative braking option
- True 4Q-power stage
- Braking resistor output
- Current limit and trip
- Symmetrical control option ±5V or ±10V
- Fault and overcurrent outputs
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- Rpm-pulse output option
- New in firmware version v1.4
- + improved closed loop features ( param. 1)
- + new operating mode options ( param. 11)
- + one option added disable input ( param. 14 )
- + control for magnetic brake ( param. 18 )
![EM-346-48V Harjaton ohjain](/files/cache/e95fe2d00363dea99cab2c8bc5b18df3_f531.jpg)
EM-346-48V BRUSHLESS DC-MOTOR DRIVER 24-48V 10A
- ONLY to the motors with hall sensors
- Three phase output
- Speed and torque adjustment
- Open/closed loop modes
- Regenerative braking option
- True 4Q-power stage
- Braking resistor output
- Current limit and trip
- Symmetrical control option ±5V or ±10V
- Fault and overcurrent outputs
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- Rpm-pulse output option
- New in firmware version v1.4
- + improved closed loop features ( param. 1)
- + new operating mode options ( param. 11)
- + one option added disable input ( param. 14 )
- + control for magnetic brake ( param. 18 )
![EM-347A Harjaton ohjain](/files/cache/d3d55b0cda35e87c8667a8538fe1f40d_f571.jpg)
EM-347A BRUSHLESS DC-MOTOR DRIVER 12-36V 55A EM-347A-fan 12-36V 70A
- ONLY to the motors with hall sensors
- Three phase output
- Speed and torgue adjustment
- Open/closed loop modes
- Dynamic braking
- Control output for cooling fan.
- True 4Q-power stage
- Braking resistor output
- Selectable brake mode
- Current limit and trip
- Symmetrical control option ±5V or ±10V
- Fault and overcurrent outputs
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- Rpm-pulse output option
- A-version has 20% improved output current
- A-version available with integrated fan
- Firmware v1.4 extended control opt. par. 11
- Firmware v1.9 options added to par. 14 and 17
![EM-347B Harjaton ohjain, Modbus väylällä](/files/cache/b9eb94aec9f4d3967241efd3654c126e_f575.jpg)
EM-347B BRUSHLESS with MODBUS( BLDC ) MOTOR DRIVER 12-48V 50A
- Only to the motors with HALL sensors
- motors 12V recom. up to 800W
- motors 24V recom. up to 1200W
- motors 48V recom. up to 1600W
- Three phase output
- Speed and torgue adjustment
- Open/closed loop modes
- Dynamic braking
- Control output for cooling fan.
- True 4Q-power stage
- Braking resistor output
- Selectable brake mode
- Current limit and trip
- Symmetrical control option ±5V or ±10V
- Fault and overcurrent outputs
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- Rpm-pulse output option
- B-board has extended voltage range
- B-board has shutdown input for idle reduction
- B-board replaced earlier A-versions ( all voltage )
- B-board has Rs-485 port ( Modbus RTU )
- B-board support B version firmwares
- B-version HW and SW offer special stop modes
- B-version board v3 support hold current option
- Prog. v1.8 param. 21 added "hold current"
- Prog v1.9 Im zero calib. added, param. 1 =3
- Prog v1.9 magn brake "slow" added to param. 1
![EM-356B Harjaton ohjain Modbus väylällä](/files/cache/1c779f57c6dc594cf6c1ddc935341c2f_f680.jpg)
EM-356B BRUSHLESS DC-MOTOR DRIVER 12-35V 15A ( 20A )
- Only for motors with Hall sensors
- Speed and torgue adjustment
- Open/closed loop modes
- Regenerative braking option
- Braking resistor output
- Fan control output
- For motors up to 100W @ 12V,
- and 200W@ 24V
- Current limit and trip
- Indication output option
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- Firmvare v1.0 or later
- Rs-485 Modbus control option
- Firmware v1.7 or later
- Added input functions, par. 11,13, 20
- Added power on mode, parameter 15
![EM-356B-SBL Harjaton paikoitus ohjain Modbus väylällä](/files/cache/1c779f57c6dc594cf6c1ddc935341c2f_f680.jpg)
EM-356B-SBL BRUSHLESS DC-MOTOR DRIVER 12-24V 15/20A POSITIONING and MODBUS
- ONLY to the motors with hall sensors
- Three phase output
- Speed and torgue adjustment
- Rs-485 Modbus cont. option
- Servo amplifier for positioning
- Regenerative braking option
- Position counter 31bit
- True 4Q-power stage
- Braking resistor output
- Fan control output
- Output current 25A with fan
- Current limit and trip
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- EM-356B-SBL replaces earlier EM-356A-SBL
- EM-356B works -B version or later firmwares
- v1.8 improved position counter freq.
- v1.8 improved currrent limit features
- v1.8 added param. 19 "start level"
![EM-366 Harjaton ohjain Modbus väylällä](/files/cache/7dcc4c3d2bb3fbd9c3171cd3643a0f49_f688.jpg)
EM-366 BRUSHLESS DC-MOTOR DRIVER 12-48V 30/25A
- Only for motors with Hall sensors
- Speed and torgue adjustment
- Open/closed loop modes
- Regenerative braking option
- Braking resistor output
- Fan control output
- For motors up to 200W @12V
- 300W @ 24V and 400W @ 48V
- Current limit and trip
- Indication output option
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- Firmvare v1.0 or later
- Rs-485 Modbus control option
- Firmware v1.7 or later
- Added input functions, par. 11,13, 20
- Added power on mode, parameter 15
![EM-366-SBL Harjaton ohjain Modbus väylällä](/files/cache/7dcc4c3d2bb3fbd9c3171cd3643a0f49_f688.jpg)
EM-366-SBL BRUSHLESS DC-MOTOR DRIVER 12-48V 30/25A POSITIONING and MODBUS
- ONLY to the motors with hall sensors
- Three phase output
- Speed and torgue adjustment
- Rs-485 Modbus cont. option
- Servo amplifier for positioning
- Regenerative braking option
- Position counter 31bit
- True 4Q-power stage
- Braking resistor output
- Fan control output
- Output current up to 30A
- Current limit and trip
- Good efficiency
- Low EMC emissions
- DIN-rail mountable