EM-240 controller is designed for small brushless DC-motors. The unit is suitable for three phase hall transducer brushless motors. There are two operating modes: in open loop operating mode the motor voltage is proportional to control value with the characteristics of a common DC-motor with brushes. In closed loop operation hall transducer signal is used to regulate motor speed. Through the feedback, a precise motor rpm in relation to control value can be achieved. The motor operating speed and running direction can be adjusted and the motor may be braked in both operating modes. The power stage uses PWM princible and is highly efficient.

Speed control value is given as analog voltage signal. The auxiliary voltage signal is regulated and may be used as reference value for control potentiometer. The acceleration speed can be adjusted with acceleration and deceleration ramp. Deceleration ramp can also be bypassed when rapid braking is desired. Additionally the unit is equipped with speed2-feature, which can be activated individually. This is especially practical in positioning applications.

Current limit can be used to restrict motor torque and is dip-switch settable. Control inputs work with positive (NPN) logic. EM-170 is EMC-tested in accordance with industrial standards.

---

 

Technical data

Supply	12-35V
Current cons.	max 2A
Idle current	20mA
Output voltage	0-32V
Motor rpm	max. 18000 rpm
Output current	1.5A continuous
	2A (10s)
Current limit	0.2, 0.3, 0.4, 0.5, 0.6
	0.7, 0.8, 0.9, 1, 1.1, 1.2
	1.3, 1.4, 1.5, 1,7 and 2A
Ramp time	0, 0.1, 0.2, 0.3, 0.5
	0.7, 1.0, 1.5s
Input control voltage	0-10V (Rin 100kohm)
ON/OFF control	0-1V =”off” 4-30V=”on”
Input impedance	10kohm
Auxiliary voltage	10V (max. 5mA)
Operation freq.	16kHz
Operating temp.	0-60°C
EMC	EN-50081, EN-50082-2
Measures	60x60x20mm
Weight	30g

Product files

• EN_em-240.pdf - Download product file (224 kb)

Stock

• 303 pcs. in stock

Price

• 57,00 € /unit

Add to Cart

---