DC motor controllers <10A

Items under this category

EM-101 DC-MOTOR CONTROLLER 24V 3A 4-QUAD

• 4-quadrant
• Protection with self recovering fuse
• Settable current limit
• Settable acceleration/brake ramp
• Load compensation
• Special braking options

• Supply voltage compensation
• Continuous / 2-step speed controlling
• Positive driving logic
• Mounting with DIN-rail or screws
• High efficiency

EM-101-BI MOTOR CONTROLLER 24V 4A 4-QUAD

• 4 Quadrants
• Self recovery fuse
• Adjustable current limit
• Adjustable accel./braking ramp
• Load compensation
• Special braking options

• Supply voltage compensation
• Speed control ±10V ( ±5V )
• Positive control logic
• Mounting with DIN-rail or screws
• High efficiency

EM-12A PWM DC-MOTOR CONTROL UNIT 24V 8A 200W

• Continuous power regulation and controlled direction change
• Adjustable current limit, acceleration ramp and max. power limit
• Load short circuit protected
• CB-mode for increased starting torque

• High efficiency, small size
• Controllable with potentiometer, switch or voltage signal
• Rail mounting base available

EM-140A DC-MOTOR STARTER 12-24V 8A

• Controlled direction change
• Soft startup, ramp
• Trip or continuous current limit mode
• Settable current limit
• High efficiency

• High momentary load capasity
• Rail mounting base fittable
• Current limit indication
• Replaces models EM-140, EM-140-12 and EM-140ind

EM-170 DC-MOTOR CONTROLLER 12-24V 1.5A

• 4-quadrants
• controlled direction change
• brake
• adjustable current limit

• acceleration and deceleration ramp
• dip-switch settable
• EMC-tested

EM-174A DC-MOTOR DRIVER 12/24Vdc 8A

• Bidirectional
• No brake
• Controlled direction change
• ± 10 V or 0...10 V control
• Soft start ramp

• Adjustable current limit
• Load compensation
• High efficiency
• High peak loading
• Rail base fittable

EM-175 DC-MOTOR CONTROLLER 12/24Vdc 10A

• Unidirectional
• 2-quadrant, drive and brake
• Dynamic and regenerative braking
• Smooth startup ramp
• Adjustable current limit

• Load compensation
• High efficiency
• High peak loading capacity
• Rail mountable

EM-176A DC-MOTOR CONTROLLER 12/24Vdc 10A

• 4 Quadrants
• Braking
• Freewheeling
• Reversal
• 0...10V control
• Optional ±10V control

• Soft start ramp
• Adjustable current limit
• Load compensation ( RxI )
• High efficiency
• High peak loading capacity
• Rail mountable

EM-180 ON-OFF DC-MOTOR DRIVER 12/24Vdc 10A

• Fast change of direction
• Soft start-up, acceleration ramp
• Settable current limit
• Trip or continuous current limit
• High efficiency

• Dynamic braking
• High momentary load capacity
• Rail base fittable
• Freewheel option
• Two control modes

EM-180A DC-MOTOR STARTER 12/24V 10A

• Fast change of direction
• Soft start-up, acceleration ramp
• Settable current limit
• Trip or continuous current limit
• High efficiency
• Low RF emissions ( EMC )
• Dynamic braking
• Low idle current ( sleep mode option )
• High momentary load capacity

• Continuous or impulse mode control
• NPN or PNP control possibility
• rail base mountable
• EM-180A replaces EM-180
• -A model has extra features added
• -impulse control mode
• -extended ramp time up to 3s.
• -selectable soft or rattle start

EM-180A-M1 DC-MOTOR STARTER 12/24V 5A

• Fast change of direction
• Soft start-up, acceleration ramp
• Settable current limit
• Trip or continuous current limit
• High efficiency
• Low RF emissions ( EMC )
• Dynamic braking
• Low idle current ( sleep mode option )
• High momentary load capacity

• Continuous or impulse mode control
• NPN or PNP control possibility
• rail base mountable
• EM-180A-M1 replaces EM-180M1
• -A model has extra features added
• -impulse control mode
• -extended ramp time up to 3s.
• -selectable soft or rattle start

EM-185A DC-MOTOR SPEED REGULATOR 12/24Vdc 3A

• 1-quadrant
• Panel mountable
• Small size
• Motor size 5-80W
• Good speed regulation

• Load comp. adjustable RxI
• Adjustable current limit
• EMC tested (CE marked)
• EM-185A replaces EM-185
• Changes in the wiring instruction

EM-213 1-QUADRANT POWER CONTROLLER 12-24Vdc 10A

• Low cost
• High efficiency
• Operating voltage compensated

• For resistive or inductive loads
• Applications: motor speed control, lamp dimmer
• Rail base fittable

EM-241C-48V DC-MOTOR CONTROLLER 24-48V 10A

• small size
• high current output
• current limit
• zero current limit
• overvoltage brake
• speed setting
• flexible control inputs

• impulse / continuous mode
• rail base mountable
• digital parameter setting
• 48V version of EM-241C
• current limit setting input ( new )
• freewheel options ( new )
• 2 or 16kHz PWM freq. ( new )

EM-28 DC-MOTOR CONTROL UNIT 12-24V 3A

• 4-quadrative operation
• Continuous / 2-step speed control
• Adjustable current limit
• Logic inputs for presettable speed
• RI-adjust for load compensation

• Selectable rundown mode, braking /
• flywheeling
• High efficiency
• Din-rail mountable

EM-323 1-Quadrant Power Controller

• One direction, 1 quarant drive
• Good speed regulation
• Current limit

• RxI load compensation
• Low cost

EM-324C DC-MOTOR CONTROLLER 12-24V 3/4A

• small size
• high current output
• current limit
• zero current limit
• overvoltage brake
• speed setting
• flexible control inputs
• impulse / continuous mode

• rail base mountable
• 2KHz or 16kHz pwm frequency
• for motor 5-50W
• digital parameter setting
• Molex connector option available
• prog. v1.9 param. 21 and 22 added
• ( serial communication )

EM-324C-JS1 DC-MOTOR CONTROLLER 12-24V 3/4A

• JS1 is specially for joystick use
• three point calibration
• small size
• high current output
• current limit
• overvoltage brake
• own speed ranges for FW and REV.

• rail base mountable
• digital parameter setting
• 2KHz or 16kHz pwm frequency
• for motor 5-50W
• JS1 program can be update
• also for standard EM-324 board

EM-67 DC-MOTOR CONTROLLER 24V 3A

• Direction change
• Braking
• Continuous / 2-step speed control
• Adjustable acceleration / braking ramp
• Adjustable current limit

• Adjustable load compensation
• Supply voltage variation compensated
• High efficiency
• Self recovery fuse
• Rail mountable

EM-76 DC POWER CONTROLLER

• Panel mounted
• Adjustable initial level
• For inductive loads ( motor / coils )
• Small size

• High efficiency >90%
• Power range 2-100 W
• EMC-tested ( CE )
• Overload and short circuit protected

EM-A24-PCI DC Motor Driver Module

• EM-A24-PCI is a DC-motor driver module.
• Inbuilt RS-485 half Dublex Bus.
• Modbus RTU.

• It's based on EM-241 driver card.
• This module has effective H-bridge power stage.

EM-A24C DC Motor Driver Module

• EM-A24 is a DC-motor driver module.
• It's based on EM-241 driver card.

• This module is PCB mountable.
• This module has effective H-bridge power stage.

EM-A24C-JS1 DC Motor Driver Module

• EM-A24 is a DC-motor driver module.
• It's based on EM-241 driver card.

• This module is PCB mountable.
• This module has effective H-bridge power stage.