Web-Shop is open again on week 31.
Electromen holidays on July, week 29-30.
Lead time 1-3 weeks for Web-Shop orders made on weeks 28-30.
No deliveries, corresponce or invoicing during holidays.

EM-A24C DC Motor Driver Module

34,00 € /unit

EM-A24C is a DC-motor driver module, It's based on EM-241 driver card. This module is PCB mountable and it needs a very small pcb area, because it will be installed vertically. This module has effective H-bridge power stage. The power stage has low EMC emission and it can meet EMC directives for industry and household enviroments without external components. This is big benefit when integrated this module to the "motherboard". Module has two pwm frequency option 2kHz offer more current, and 16kHz is noiseless.
BW and FW are control inputs starts and stop motor, and these mode can be set also with parameter 1 and 5.
Stop input stops with ramp, but not block new start. Stop input can be also work as analog current limit, this mode can be active with set parameter 6 and 7 to 0
Fault input stop immeadetly without ramp and keep stop until disappear. Fault out works also as indication output, it can be set with param. 10
Speed-2 input select presetted speed or it can also work as analog speed input. This input can be set also with parameter 5.
Limit input stops motor, these can be use for example as a end limit input. and these inputs have multiple input logic combinations, which can be set with parameter 3

TECHNICAL DATA ( prog ver. EM-A24C v2.0)

EM-A24CSupply voltage cont. max. 10-35V
Overvoltage limit adjustable 15-40V
Start up voltage 9V, shutdown voltage 8V
Current output when ( Ta12A at 100% speed / 7A at 5-99% speed pwm=2kHz
8A at 100% speed / 4A at 5-99% speed pwm=16kHz
Peak ( 5s.) 30A at 2khz pwm and 25A at 16kHz pwm
Current limit adjustable 0.1-25A ( at start max 30A )
Overheat limit 100°C
Start and stop ramp adjustable 0-5s
PWM frequency 2kHz / 16kHz
Speed input scale ( speed-2 ) 0-5V = 0-100% pwm
Input control logic: high =4-30V, low=0-1V
Control input impedances typ. 100 kohm / 2.2kohm
Limit FW / BW input imped. typ 10kohm
Control input response time typ 5ms.
Fault out. NPN open coll. max 30V / 50mA
Fault in actives Uin < 1V ( NPN )
Connector PCB pins dia 1mm
CE-tested for industrial environment ( emc )
Operating temp ( Ta ) -40...60°C
Weight 15 g

Product files


  • 367 pcs. in stock


  • 34,00 € /unit