EM-A24C-JS1 DC Motor Driver Module
EM-A24 is a DC-motor driver module, It's based on EM-241 driver card. This module is
PCB mountable and it needs a very small pcb area, because it will be installed vertically.
This module has effective H-bridge power stage. The power stage has low EMC emission
and it can meet EMC directives for industry and household enviroments without external
components. This big benefit when integrated this module to the "motherboard".
Module has two pwm frequency option 2kHz offer more current, and 16kHz is noiseless.
There is available various firmware version for this module This version EM-A24C-JS1
is specially for joystick use, and included for example three point calibration.
Firmware includes also many basic features for dc motor driver, like current limits,
stop and start ramps, and load compensation. The settings of device can be done
digitally with parameters. Firmware update can be done also with Ementool interface
Supply voltage cont. max. 10-35V
Overvoltage limit adjustable 15-40V ( connect motor to freewheel )
Overvoltage dynamic brake 40V ( shorting motor poles )
Start up voltage 9V, shutdown voltage 8V
Continuous current output when ambient temp. is < 50°C
12A at 100% speed / 7A at 5-99% speed ( pwm freq. 2kHz )
8A at 100%speed / 4A at 5-99% speed ( pwm freg 16kHz )
Peak current ( 5s. ) 30A at 2kHz / 25A at 16khz
Current limit adjustable 0.1-25A ( at start max. 30A )
Overheat limit 100°C
Start and stop ramp adjustable 0-5s
PWM frequency 2kHz / 16kHz ( selectable )
Joystick input scale 0-5V
Input control logic: high =4-30V, low=0-1V
Control input impedances typ. 47kohm
Limit FW / BW input imped. typ 10kohm
Control input response time typ 5ms.
Fault out. NPN open coll. max 30V / 50mA
Fault in actives Uin < 1V ( NPN )
Motor and supply connectors 2.5mm
Control connectors 1mm
Dimensions in DIN-rail base 45x80x45mm
CE-tested for industrial environment ( emc )
Operating temp ( Ta ) -40...60°C
- 26 kpl varastossa
32,00 € /kpl