EM-30-HALL ROTATIONAL SPEED SENSOR
170,00 € /kpl
TUOTETIEDOT AINOASTAAN ENGLANNIKSI
EM-30-HALL -transducer operates with ferrous materials. Transducer is sensitive to the direction of the magnetic flux. The transducer has marks for directing it to the rotating level of the gear wheel. The air gap between wheel and transducer can vary from 3 to 0mm. The nominal installation distance is 2mm. The minimum nominal module for the gear wheel is 2mm (DIN). If the transducer is used with gear smaller module than 2mm, the installation distance should be decreased. With substantially larger gear teeth the distance can be increased to 3mm.
Technical data
| Supply voltage | 12- 30 Vdc |
| Quiescent current | max 25mA |
| Output current | source Vcc/2200ohm |
| sink 30mA | |
| Pulse frequency | 0…5kHz |
| Gear wheel module | nom. Min. 2mm |
| Installation distance | 2mm, nominal |
| Operating temp. Range | -10 … 80 C |
| Degree of protection | IP67 |
| Body, nut material | AISI 317 |
Tiedostot
- EN_em-30-hall.PDF - Lataa tiedosto (71 kt)
Varastotilanne
- 15 kpl varastossa
Hinta
-
170,00 € /kpl