EM-M17b converts applied frequency to 0...10 V or to 4...20 mA signal. Frequency range is selectable with DIP-switches. Converter can be used with most of the commonly available transducer types. Frequency can be applied also as a pulsed voltage signal. The frequency input can be isolated optically if transducer supply and SW1/1 is left open. Converted signal is filtered using a 2nd order filter so that the ripple of the incoming frequency is efficiently attenuated. The output of EM-M17b is both short circuit and overload protected. Operating voltage range is wide and the supply is protected against incorrect polarity.
TECHNICAL DATA | |
---|---|
Operating Voltage | 20...32 Vdc |
Current Consumption | 50 mA max. |
Linearity Error | 0.1 % typical |
Thermal Drift | < 100 ppm/°C |
Transducer Supply | 15 Vdc / 8.5 Vdc (NAMUR) |
Input Settings | Open collector NPN / Open collector PNP / NAMUR / Pulse (isolated) |
Input Range | 4...25 V |
Input Impedance | approx. 2 kΩ |
Frequency Ranges | 0...200, 500, 1000 Hz |