gbfisedeesfritpt

Electronics

Product files

Items under this category

EM-236A Interface Unit

EM-236A Interface Unit

  • * Accurate and easy adjustment
  • * Good adjustment repeatability
  • * Saves space in products
  • * Gives economical advance
  • * Enables dynamic monitoring
  • * Easy to use
  • * Smaller and lighter than EM-236
  • * Replaces previous EM-236
EM-268 USB link

EM-268 Module for Firmware Updates

    • OLD MODEL, only for spares
    • Use with EmenToolLite
    • Firmware update
    • Can use as USB-serial converter
    • Micromatch connector
    • 5V serial In/Out
    • FTDI series drivers
EM-326 Bt Dongle

EM-326 Bt Dongle

  • Parameters setting with iPhone.
  • Easy connect
  • Control devices
  • Free Ementool app is available in App Store
EM-328 Interface unit

EM-328 Interface unit series "dongle" for EmenTool Lite

  • USB to serial converter
  • EmenTool Lite compatible
  • Three different choices
  • Power supply to the target device
  • Galvanic isolation version ( -ISO )
  • Low cost version ( A )
  • Replaces earlier dongle EM-268
  • Link cable length 1m
  • Replaceable link cable ( not in -A )
EM-328-ISO Interface unit

EM-328-ISO Interface unit series "dongle" for EmenTool Lite

  • USB to serial converter
  • EmenTool Lite compatible
  • Three different choices
  • Power supply to the target device
  • Galvanic isolation version ( -ISO )
  • Low cost version ( A )
  • Replaces earlier dongle EM-268
  • Link cable length 1m
  • Replaceable link cable ( not in -A )
EM-328A Interface unit

EM-328A Interface unit series "dongle" for EmenTool Lite

  • USB to serial converter
  • EmenTool Lite compatible
  • Three different choices
  • Power supply to the target device
  • Galvanic isolation version ( -ISO )
  • Low cost version ( A )
  • Replaces earlier dongle EM-268
  • Link cable length 1m
  • Replaceable link cable ( not in -A )
EM-A1 Symmetric Control

EM-A1 OPTION CARD FOR SYMMETRIC CONTROL

  • Can be used with products
  • EM-151A
  • EM-176A
  • EM-206
  • EM-282
EM-A14T-4 Remote Control Transmitters

EM-A14T-4 REMOTE CONTROL TRANSMITTER

  • 433MHz frequency band.
  • < 10mW output ( licence-free )
  • Rolling code security ( KeeLoq )
  • AM or FM options available
EM-A14T-FM Remote Control Transmitters

EM-A14T-FM REMOTE CONTROL TRANSMITTER

  • 433MHz frequency band.
  • < 10mW output ( licence-free )
  • Rolling code security ( KeeLoq )
  • AM or FM options available
EM-A14T-FM-4 Remote Control Transmitter

EM-A14T-FM-4 REMOTE CONTROL TRANSMITTER

  • 433MHz frequency band.
  • < 10mW output ( licence-free )
  • Rolling code security ( KeeLoq )
  • AM or FM options available
EM-A14T2 Remote Control Transmitter

EM-A14T2 REMOTE CONTROL TRANSMITTER

  • 433MHz frequency band.
  • < 10mW output ( licence-free )
  • Rolling code security ( KeeLoq )
  • AM or FM options available
EM-A18+14T Remote Control

EM-A18 + EM-A14 REMOTE CONTROL SYSTEM

    • Motherboard + receiver hybrid EM-A14R
    • KeeLog
    • Two outputs
    • Can be learned up to 16 transmitters
EM-A23 Braking Load

EM-A23 Braking Load Resistor

  • Operating voltage 12-40V
  • Idle current 10mA
  • Switch on limit 18-39V adjustable
  • Switch on current 5A at 25V supply
  • Brake load 5ohm.
EM-A23-48V Braking load

EM-A23-48V Braking load

  • Operating voltage 33-65V
  • Idle current 2mA
  • Switch on limit 18-39V adjustable
  • Switch on current 3A at 50V supply
  • Brake load 15ohm.
  • Hystersis typ. 10%
  • Overtemp limit 130 °C
EM-A3-10K-A-O Control Potentiometer

EM-A3-10K-A-O CONTROL POTENTIOMETER

    • Control Potentiometer
    • Automation applications
EM-A41 Supply Reduce and Emergency Relay

EM-A41 Supply Reduce and Emergency Relay

  • -High current handling capacity
  • -Low idle current
  • -Hardware emergency switch off
  • -Switch on with pilot current
  • -Compatible for capacitive loads
  • -Din rail mountable
  • -Relay faulty output
  • -Compatible with EM- motor drivers
  • -Recuces power on current surge
EM-A43 Brake Resistor

EM-A43 Brake Resistor

  • Operating voltage 12-60V
  • Idle current 5mA
  • Switch on limit 20-60V adjustable
  • Switch on current typically 10-20A
  • Brake load 1.4 / 5.6ohm.
  • Overtemp limit 160 °C
EM-M66 Ramp Generator

EM-M66 RAMP GENERATOR

  • Three way isolated
  • Multiple output ranges
  • 254 steps
  • Dip-switch settable
  • Multiple ramp speeds
  • Zero and gain fine adjustments
  • Isolation voltage 1000V
  • Short circuit protected output
  • Rail mountable
EM-P189 Serial TX/RX Adapter

EM-P189 Serial TX/RX to RS-485 Adapter

  • Operating voltage 4.5-6V ( powered with link cable )
  • Idle current consumption 5mA
  • Rs-485 Terminal resistor 120 ohm in socket, if needed
  • Rs-485 Line bias resistors 10kohm
  • Link cable Micro-Match to Micro-Match 25cm
  • Weight with cable 28g
EM-T50-2R2-80W Power Resistor

EM-T50-2R2-80W Power Resistor

  • Resistance EM-T50-2R2-80W 2.2ohm
  • Resistance EM-T50-4R7-80W 4.7ohm
  • Nominal power duration 80W
  • Peak power 500W ( 5s )
  • Weight 165g
EM-T50-4R7-80W Power Resistor

EM-T50-4R7-80W Power Resistor

  • Resistance EM-T50-2R2-80W 2.2ohm
  • Resistance EM-T50-4R7-80W 4.7ohm
  • Nominal power duration 80W
  • Peak power 500W ( 5s )
  • Weight 165g