EM-83 vibration scanner unit can be used for measuring total vibration level or it can be used for detecting discrete frequency components like with analysator. The total vibration level measurement is done using a true rms detection (”rms value”). The frequency component search is enabled with digitally controlled narrow bandwidth band-pass filter. The dominant frequency components can be searched with the auto-stop feature which stops the scanning when the scanned level exceeds the trig value. The bar display helps the search by showing the currently measured (scanned) vibration level in ratio to the total level. Over-range indication warns of exceeding the measurement range of the sensor or the unit.
EM-83 is equipped with good low frequency features which are partially due to mem-type silicon based sensors. The unit uses sensor types EM-82-05 and EM-82-50. Measuring ranges are ± 5g and ± 50g.
These sensors provide a good stability in relation to time and temperature. Sensors have also a
good shock resistance.
EM-83 is fairly easy to use, all readings are displayed simultaneously on the clear easy-to-read display. The unit recognizes the sensor used and autoscales the display accordingly. With a single 9V battery the unit can be used up to 10 hours. Automatic power-off cuts the power after 15 minutes of idle time.
The device is housed to a durable aluminium chassis and the display is shielded with a double layers of glass.
| TECHNICAL DATA | |
|---|---|
| Supply | 9V battery |
| Operating Time | typ. 10 hours |
| Sensor Supply | approx. 9V |
| Auto Power Off | after 15 min |
| Sensor Types | EM-82-05 (± 5g) |
| EM-82-50 (± 50g) | |
| Measuring Qualities | (m/s²), (mm/s) |
| Measuring Ranges | |
| 5g sensor: 0.01...35m/s² (RMS) | |
| 50g sensor: 0.1...350m/s² (RMS) | |
| 5g sensor: 0.01...40mm/s (RMS) | |
| 50g sensor: 0.1...350mm/s (RMS) | |
| Total Level Range | Range 1: 2...200Hz |
| Range 2: 2...2000Hz | |
| Signal In Scaling | Scaled for sensors EM-82-xx |
| Aux In Scaling | 100mV rms gives 10m/s² reading |
| Precision | EM-83 typ. ± 2% (159Hz) |
| Frequency Range | See figure 1 & 2 (PDF) |
| Frequency Step | 2-5Hz step 0.02Hz |
| 5-10Hz step 0.05Hz | |
| 10-20Hz step 0.1Hz | |
| 20-50Hz step 0.2Hz | |
| 50-100Hz step 0.5Hz | |
| 100-200Hz step 1Hz | |
| 200-500Hz step 2Hz | |
| 500-1000Hz step 5Hz | |
| 1000-2000Hz step 10Hz | |
| Weight | 450 grams |
| Dimensions | 170x110x35mm |
| Operating Temp. | 0...50°C |
