EM-M20 converts the position information of a potentiometer to milliampere signal ( 4...20 mA). Converter acquires its operating voltage from the current loop and needs no additional supply. Adjustments have no mutual effect. This makes the adjusting more easy and faster. The filtering can be selected from four alternatives to be suitable for different applications. Versatile protection circuits protect the converter from interfering peaks, over voltage and incorrect connections.
| TECHNICAL DATA | |
|---|---|
| Supply | 12...32 Vdc |
| Output Range | 4...25 mA |
| Linearity Error | < 0.1 % |
| Thermal Drift | < 50 ppm/°C |
| Current Loop Resistor | 0...800 ohm |
| Potentiometer | > 1 kohm |
| Usable Potentiometer | 1...10 kohm |
| High Frequency Limit | 1, 10, 100, 1000 Hz |
| Oper. Ambient Temp. | 0...60 °C |
Ordering larger quantities +100pcs.
For volume discounts pls. see the Contact Info for Electromen distributors. If you didn´t find your country distributor then ask direct offer from office@electromen.com
