EM-M19 supplies a regulated voltage for potentiometer. The voltage signal from the potentiometer is filtered and amplified. The output range may be selected from five different alternatives. Output signal is easily set with DIL-switches. The supply is galvanically isolated from the output signal. This permits flexible installation to different systems. The output stage is short circuit protected. Operating voltage inputs are protected against incorrect polarity.
| TECHNICAL DATA | |
|---|---|
| Supply | 18...32 Vdc |
| Current Consumption | 50 mA max. |
| Linearity Error | < 0.2 % |
| Thermal Drift | < 100 ppm/°C |
| Potentiometer | 1...47 kohm |
| Pot. Meter Supply | 5 Vdc (10 mA max.) |
| Frequency Range | DC...10 Hz, 1000 Hz opt. |
| Output Ranges | 4...20 mA, RL 0...500 ohm |
| 0...10 V, RL > 1 kohm | |
| 0...5 V, RL > 1 kohm | |
| -10...10 V, RL > 1 kohm | |
| -5...5 V, RL > 1 kohm | |
| Adjust Ranges | Gain ± 30 % |
| Zero 50 % | |
| Isolation Voltage | 500 V |
| Oper. Ambient Temp. | 0...50 °C |
