EM-LP150 is an enclosed power supply designed to provide power for multiple Electromen products. Its 150 VA toroidal transformer and large filtering capacitance make it particularly suitable for motor-control applications requiring short-duration current peaks.
The enclosure includes an aluminium mounting plate with space for several Electromen modules. Compatible products can be attached to the plate using 3 mm snap-in spacers, providing a compact basis for assembling a complete motor-control system.
DC motors can require substantially more current during starting, acceleration and sudden load changes than during steady operation. The toroidal transformer provides short-duration current capability for these motor starting and torque peaks.
The specified maximum output current is 10 A at a 10% duty cycle over a 10-second cycle. The continuous output-current rating is 3.5 A, subject to the total thermal losses inside the enclosure.
The power supply includes 8,800 µF of filtering capacitance to reduce output-voltage ripple and support transient current demand.
The transformer incorporates a self-resetting thermal cut-out with a specified operating temperature of 110 °C. The protection interrupts operation if the transformer temperature becomes excessive and resets after the transformer has cooled.
The EM-LP150 is housed in a Fibox PC150/100HG polycarbonate enclosure with an IP65 rating. Three PG11 cable glands are included for supply, motor and control wiring.
The internal aluminium plate provides a common mounting surface for the power supply components and compatible Electromen electronic modules. Heat generated by all installed electronic cards must be considered when determining the permissible continuous output current.
| Input voltage | 230 VAC, 50/60 Hz |
|---|---|
| Input fuse | T1.6 A, 5 × 20 mm |
| Transformer thermal cut-out | 110 °C, self-resetting |
| Transformer rating | 230 V / 22 V, 150 VA |
| Maximum output current | 10 A at 10% duty cycle over a 10-second cycle |
| Continuous output current | 3.5 A |
| Filtering capacitance | 8,800 µF |
| Mounting plate | Aluminium plate for EM products with 3 mm snap-in spacers |
| Enclosure | Fibox PC150/100HG polycarbonate enclosure |
| Degree of protection | IP65 |
| Cable glands | 3 × PG11 |
| Dimensions | 130 × 180 × 103 mm |
| Weight | 2.30 kg |
| Compliance | EMC tested and CE marked |
Ordering larger quantities +100pcs.
For volume discounts pls. see the Contact Info for Electromen distributors. If you didn´t find your country distributor then ask direct offer from office@electromen.com
