EM-M25 is designed for measuring AC voltage. The device was designed for measuring mains voltage and as a converter to current signal. The AC voltage is measured as TrueRMS, in other words the device gives RMS output also from other than sin-based signals. The measured voltage is converted into 4...20mA signal. The devices primary and secondary is galvanically isolated. The device takes its supply power from current loop and requires no other power supply. The device can also be used as 1...5V signal transducer according to the schematic down low. EM-M25 is also efficiently protected from faulty connections and voltage peaks.
TECHNICAL DATA | |
---|---|
Supply | 12...32 Vdc |
Measuring Range | 0...145 Vac |
(1 & 2 wired) | |
0...230 Vac | |
0...400 Vac | |
Output Signal | 4...20 mA / 1...5 V |
Linearity Error | < 2 % (sin) |
Thermal Drift | < 200 ppm/°C |
Settling Time | 0.3 s |
Frequency Range | 45...1000 Hz |
Adjust Range | -30...+20 % |
Isolation | 1500 Vac |
Loop Resistance | 0-700 ohm (24 V) |
Oper. Ambient Temp. | 0...60 °C |