NOT RECOMMENDED FOR NEW PROJETCS, SEE EM-176A+A1 card
EM-101-BI is designed for modern automation systems. Controls can be performed easily with relay- or open collector outputs. Analog controls work with ±10V voltage. Usable motor can be permanent magnet motor with brushes in power range of 5...80 W. Due to the advanced pulse control (PWM) the unit operates with high efficiency, low temperature losses and provides a high starting torque.
Loading of the motor can be compensated with inbuilt RI-adjustment. The current, or in other words, the torque of the motor can be controlled with DIP-switch. The operation of the current limit is indicated with a red led. There are a variety of braking options available in this device. For most effective braking “reverse braking”-mode can be used. In this mode reversed driving is used for braking, which effects extremely fast function. Additionally the card utilises short circuit braking which short circuits the motor circuit during the braking. EM-101 also has inbuild settable time acceleration- and braking ramps.
| Technical Data EM-101-BI | |
|---|---|
| Supply voltage | 12-34Vdc |
| Over voltage protection | 36V |
| Idle current (approx.) | 50mA |
| Control current | 4A continuous, 5A max. |
| Control power | 80W continuous |
| Motor voltage | 0-15V (12V range) / 0-29V (24V range) |
| Current limit | 0.3...5A |
| Voltage loss | 1V when Im = 4A |
| Fuse | 4A, self-recovery |
| Ramp time | 0.5s...5s |
| Control voltage | -5...0...5V → -10...0...10V |
| Control potentiometer | 2...10kΩ |
| Digital control | |
| "On" state | Uin 4-30V |
| "Off" state | Uin 0-1V or open |
| Dimensions | 89x73x26mm |
| Weight (approx.) | 70g |
