EM-A24 is a DC-motor driver module, It's based on EM-241 driver card. This module is PCB mountable and it needs a very small pcb area, because it will be installed vertically. This module has effective H-bridge power stage. The power stage has low EMC emission and it can meet EMC directives for industry and household enviroments without external components. This is big benefit when integrated this module to the "motherboard".
Module has two pwm frequency option 2kHz offer more current, and 16kHz is noiseless.
TECHNICAL DATA | |
---|---|
Supply voltage continuous (max.) | 10-35V |
Overvoltage limit adjustable | 15-40V (connect motor to freewheel) |
Overvoltage dynamic brake | 40V (shorting motor poles) |
Start-up voltage | 9V |
Shutdown voltage | 8V |
Continuous current output (when ambient temp. < 50°C) | 12A at 100% speed / 7A at 5-99% speed (PWM freq. 2kHz) |
8A at 100% speed / 4A at 5-99% speed (PWM freq. 16kHz) | |
Peak current (5s.) | 30A at 2kHz / 25A at 16kHz |
Current limit adjustable | 0.1-25A (max. 30A at start) |
Overheat limit | 100°C |
Start and stop ramp adjustable | 0-5s |
PWM frequency | 2kHz / 16kHz (selectable) |
Position set input scale max. | 0-5.5V |
Input control logic | High = 4-30V, Low = 0-1V |
Control input impedance | Typ. 47kΩ |
Pulse input impedance | Typ. 10kΩ |
Pulse input frequency max. | 800Hz / pulse line |
Control input response time | Typ. 5ms |
Fault output | NPN open collector, max. 30V / 50mA |
Fault input active | Uin < 1V (NPN) |
Dimensions | As shown in the drawing above |
CE-tested for industrial environment (EMC) | |
Operating temperature (Ta) | -40...60°C |
Weight | 15g |