Elektronik för automation – DC-motorstyrning, kundanpassade lösningar & produkter i lager
Tillgängligt i vår webbshop – snabb leverans till Finland, Europa och resten av världen.

Välkommen

Electromen Oy Ltd - Konstruktion och tillverkning av elektroniska produkter sedan 1988. Kundinriktad verksamhet i över två decennier. Med vår långa erfarenhet av hundratals elektroniska utvecklingsprojekt är vi bättre än någonsin rustade att betjäna våra kunder.

Highlighted products

EM-180A DC-Motor Starter

Fast change of direction
Soft start-up, acceleration ramp
Settable current limit
Trip or continuous current limit
Low RF emissions ( EMC )
Low idle current ( sleep mode option )
Continuous or impulse mode control
NPN or PNP control possibility
EM-180A replaces EM-180

Stock: 347 pcs.

EM-185A DC-Motor Speed Regulator

1-quadrant
Panel mountable
Motor size 5-80W
Good speed regulation
Load comp. adjustable RxI
EMC tested (CE marked)

Stock: 498 pcs.

EM-241C DC-Motor Controller

Basic driver for logic and speed control
Motor up to120W@12V/ 200W@24V
current limit
Start and Stop ramps
speed setting
flexible control inputs
impulse / continuous mode
rail base mountable
digital parameter setting

Stock: 2341 pcs.

EM-241B-PLI DC-Motor Controller

for motor with 2 pulse output
End limits based on pulse counter
current limit
recommended max. motor size
120W@12V and 200W@24V
speed setting
Several enclosure options
digital parameter setting
APPLICATIONS
hatch and gate opener
actuator stroke, force and speed adjust

Stock: 274 pcs.

EM-247C DC Motor Controller

basic driver for logic and speed control
0.7kW@12V, 1kW@24V
current ( torque ) limit
adjustable start or stop ramps
flexible control inputs
brake output, magn. or res.
impulse / continuos mode
digital parameter setting
APPLICATION
small vehicles
lifters and conveyor
actuators torque limit

EM-262A Power Controller

Triac, phase angle controller
50...700W, suitable loads: resistor, fan motor and transformer
Base level adjustment
0...5V, 0...10V or 4...20mA control
Aux. voltage for potentiometer use
Galvanic isolation
Rail base mountable

Stock: 116 pcs.

EM-269A Brushless Driver

Only motor with hall sensors
Basic driver

Stock: 285 pcs.

EM-282D DC-Motor Controller with Modbus RS485

EM-282D DC-Motor Controller
EM-282D DC-MOTOR CONTROLLER 12-48V , 100A - 80A
basic driver
for motors up to 1.5kW@24-48V
high current output
brake load output
current limit & start and stop ramps
current limit for brake also
speed setting/adjustment
flexible control inputs
impulse / continuous mode
rail base mountable
digital parameter setting
C versions program
added Rs-485 bus

EM-285 Speed Regulator

Speed cont. to 1-direction
Panel mountable
Small size
Motor size 30-200W
Good speed regulation
Load comp. adjustable RxI
Adjustable current limit
Overheating protection
EMC tested.

Stock: 273 pcs.

EM-295C DC-Motor Controller

DC motor speed controller, one direction
Recom, motors up to 200W@12V, 300W@24V and 400W@48V
Regenerative braking
Braking resistor or Magnetic brake control output
Voltage stabilized and RxI load compensation

Stock: 274 pcs.

EM-314A Stepper Controller with Modbus RS485

Bibolar chopper
1, 1/2 , 1/4.....1/64 steps
Four preset function inputs
PNP or TTL control
Quiet run current control
Acceleration / deceleration ramps
Low EMC emissions
Also available with Molex connector
DIN-rail base mountable
Analog speed control input
Modbus control option

EM-324C DC-Motor Controller

current limit
speed setting
NPN/PNP control inputs
impulse / continuous mode
2KHz or 16kHz pwm frequency
digital parameter setting
Molex connector option available
EMC Tested, Industrial and house hold

Stock: 503 pcs.

EM-337A-PLI Parallel Driver with Modbus RS485

12 - 24V, 4 x 10A

synchronized 4 parallel driving
operates with pulse feedback
2 pulse line/ motor
quadrature pulse counting
current and temperature limit
settable drive speed
acceleration and deceleration ramps
range limitations
digital parameter setting
brake ( release ) output
safety switch input
Rs-485 ( Modbus ) control
safety reverse function
APPLICATIONS
table lifter
hatch control
worktop control
actuator control

EM-339A-PLI Parallel Driver with Modbus RS485

12 - 35V, 2x 10A

synchronized parallel driving
operates with 2ch pulse feedback
quadrature pulse counting
current and temperature limit
acceleration and deceleration ramps
range limitation
digital parameter setting
brake ( release ) output
safety switch input
safety reverse function
APPLICATIONS
For Table lifter and Door and Hatch control
Synchronous Actuator or Pilar control

Stock: 326 pcs.

EM-347B Brushless Motor Driver with Modbus RS-485

Only motor with hall sensors
Multifunctional driver
Closed loop control option
Braking resistor output
Regenerative braking
Din rail mountable

EM-352 Brushless DC-motor Driver with Modbus RS485

Only motor with hall sensors
Multifunctional driver
Closed loop control option
Braking resistor output
Regenerative braking
Din rail mountable

EM-356C Brushless DC-motor driver with Modbus RS485

Only motor with hall sensors
Multifunctional driver
Closed loop control option
Braking resistor output
Regenerative braking
Din rail mountable

Stock: 496 pcs.

EM-362D DC-Motor Controller with Modbus RS485

EM-362D is a full bridge DC-motor starter. It is designed to work with low voltage DC-motors (permanent magnet and brushed) in applications where a va...

EM-A24C DC Motor Driver

10 - 35V, 12A see details

EM-A24 is a DC-motor driver module.
It's based on EM-241 driver card.
This module is PCB mountable at vertical mounting

Stock: 1240 pcs.

EM-A43 Brake Resistor

Operating voltage 12-60V
Idle current 5mA
Switch on limit 20-60V adjustable
Switch on current typically 10-20A
Brake load 1.4 / 5.6ohm.
Overtemp limit 160 °C

EM-366A-SBL BRUSHLESS DC-MOTOR DRIVER POSITIONING and MODBUS

12 - 48V, 30-25A

For motor with hall sensor
Max. motor recom. 200W@12V, 400W@48V
Speed and torgue adjustment
Analog or Rs-485 Modbus control
Servo amplifier for positioning
Regenerative braking option
Position counter 31bit
True 4Q-power stage
Braking resistor output
Fan control output
Current limit and trip
Low EMC emissions
DIN-rail mountable

EM-366A Brushless DC-Motor Driver with Modbus RS-485

12 -48V, 30-25A

Only for motors with Hall sensors
Speed and torgue adjustment
Open/closed loop modes
Regenerative braking option
Braking resistor output
Fan control output
For motors up to 200W @12V
300W @ 24V and 400W @ 48V
Current limit and trip
Indication output option
Good efficiency
Low EMC emissions
DIN-rail mountable

AAA - credit rating

ISO-certified suppliers and subcontractors

100% Finnish production chain

Device design, programming, and laboratory testing

Short delivery time

Our website uses cookies to enhance user experience. You can adjust your preferences from the settings

Cart

Overall:

0,00€

Move to register