EM-M14 Galvanic Isolator

EM-M14 is an easy way to isolate current loop signals obtaining a good accuracy. No additional supply voltage is required. Voltage drop is minimal although the input voltage range is very wide. EM-M14 isolator is effectively protected against misconnections, over voltages and over currents. Output current can also be converted to a voltage signal with the inbuilt 100 ohm resistor. NOTE: As an additional feature the EM-M14 module can also be used to isolate loop powered transducers. 


 

TECHNICAL DATA

Operating Range4...20 mA (0...25 mA)
Voltage Drop1:1
Linearity Error< 0.1 %
Thermal Drift< 50 ppm/°C
Loading Error< -0.05 % / 100 Ω
Load (RL)0...500 Ω
Input Voltage Range3...27 V
Input Voltage Limit< 4 V when I = 20 mA
Over Current Limit30 V

Tuotetiedostot

EN_em-m14.pdf (57,25 KB)
Varastosaldo: 87 kpl
67,00 €
VAT 0%

AAA - credit rating

ISO-certified suppliers and subcontractors

100% Finnish production chain

Device design, programming, and laboratory testing

Short delivery time

Takaisin ylös
Sivustomme käyttää evästeitä käyttäjäkokemuksen parantamiseksi. Voit muuttaa eväste valintojasi asetuksista
1 Tuotetta ostoskorissa
Ostoskori
Yhteensä:
0,00€