Web-Shop is open again on week 31.
Electromen holidays on July, week 29-30.
Lead time 1-3 weeks for Web-Shop orders made on weeks 28-30.
No deliveries, corresponce or invoicing during holidays.

EM-A24-SPF DC-Motor Driver module With Positioning Pulse Feedback

34,00 € /kpl

EM-A24 is a DC-motor driver module, It's based on EM-241 driver card. This module is PCB mountable and it needs a very small pcb area, because it will be installed vertically. This module has effective H-bridge power stage. The power stage has low EMC emission and it can meet EMC directives for industry and household enviroments without external components. This is big benefit when integrated this module to the "motherboard".
Module has two pwm frequency option 2kHz offer more current, and 16kHz is noiseless.

Supply voltage cont. max. 10-35V
Overvoltage limit adjustable 15-40V ( connect motor to freewheel )
Overvoltage dynamic brake 40V ( shorting motor poles )
Start up voltage 9V, shutdown voltage 8V
Continuous current output when ambient temp. is < 50°C
12A at 100% speed / 7A at 5-99% speed ( pwm freq. 2kHz )
8A at 100%speed / 4A at 5-99% speed ( pwm freg 16kHz )
Peak current ( 5s. ) 30A at 2kHz / 25A at 16khz
Current limit adjustable 0.1-25A ( at start max. 30A )
Overheat limit 100°C
Start and stop ramp adjustable 0-5s
PWM frequency 2kHz / 16kHz ( selectable )
Positionh set input scale. max. 0-5.5V
Input control logic: high =4-30V, low=0-1V
Control input impedances typ. 47kohm
Pulse input impedance. typ 10kohm.
Pulse input freq. max. 800Hz / pulse line
Control input response time typ 5ms.
Fault out. NPN open coll. max 30V / 50mA
Fault in actives Uin < 1V ( NPN )
Dimensions as is drawing above
CE-tested for industrial environment ( emc )
Operating temp ( Ta ) -40...60°C
Weight 15g



  • Tiedustele saatavuutta.


  • 34,00 € /kpl