Brushless DC motor controllers
Product files
Items under this category
![EM-106A Brushless Controller](/files/cache/3774c7d18f625cdb13fa3da44e8a6bdd_f112.jpg)
EM-106A BRUSHLESS DC-MOTOR CONTROL UNIT 12-24V 7A
- Three phase output
- Direction change
- Hall-transducer supply and input
- Supports 60° and 120° commuting
- Adjustable current limit
- Direct or freq.locked driving
- High efficiency
- Inbuilt fuse
- Rail mounting base available
- Compatible with EM-106
- Improved current limit behavior
![EM-151B Brushless Driver](/files/cache/622be6539f40a68f577f1dc56458110f_f124.jpg)
EM-151B BRUSHLESS DC MOTOR DRIVER 12-24V 25A
- Three phase output
- Open or Closed loop speed cont.
- Controlled direction change
- Dynamic or Regenerative braking
- 60° or 120° commutation
- ±10V control option
- Fault output
- High efficiency
- Thermal protection
- Rail base mountable
![EM-206 Brushless Controller](/files/cache/fe9a325c8dd233cdf8a56500caaf8f16_f142.jpg)
EM-206 BRUSHLESS MOTOR CONTROLLER 12-36V 10A
- Three phase output
- Continuous speed adjustment
- Reversing
- Braking
- ±10V control option
- Hall sensor supply and input
- 60º or 120º commutation
- Settable / controllable current limit
- Fault output
- Open or closed loop activity
- High efficiency
- Rail base mountable
![EM-206-48 Brushless Controller](/files/cache/7c4882a4a6ed77e40bfa3b4504f047a5_f143.jpg)
EM-206-48 BRUSHLESS MOTOR CONTROLLER 20-56V 5A
- Three phase output
- Continuous speed adjustment
- Reversing
- Braking
- ±10V control option
- Hall sensor supply and input
- 60º or 120º commutation
- Settable / controllable current limit
- Fault output
- Open or closed loop activity
- High efficiency
- Rail base mountable
![EM-269A Brushless Driver](/files/cache/cfbc03a4f516b24095670fb21a025139_f519.jpg)
EM-269A BRUSHLESS DC-MOTOR DRIVER 12-35V 2A
- Only for motors with hall sensor
- Three phase output
- Speed adjustment
- Current limit and trip.
- Open/closed loop modes
- Settable Indication output
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
![EM-291A Brushless Driver](/files/cache/b1ea754626687dc88eed3db542d80bd1_f522.jpg)
EM-291A BRUSHLESS DC-MOTOR DRIVER 12-35V 4A
- Only for motors with hall sensors
- Three phase output
- Speed adjustment
- Current limit and trip
- Open/closed loop modes
- Settable indication output
- Good efficiency
- Low current version available ( -LC )
- Low EMC emissions
- DIN-rail mountable
![EM-316A Brushless Driver](/files/cache/1f552dabfbeb6d75ece243be504c8fd9_f504.jpg)
EM-316A Brushless DC-Motor Driver 12-35V 10A
- ONLY to the motors with hall sensors
- Three phase output
- Speed and torgue adjustment
- Open/closed loop modes
- Dynamic braking
- Current limit and trip
- Fault and overcurrent outputs
- 60° / 120° commutation options
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- EM-316A is compatible with EM-316
- Added EM-A1 card slot for ±10V control
- Rpm-pulse output option ( prog v1.5 )
![EM-346 Brushless Driver](/files/cache/2f5b1bf9514db1c9aa49e6cf350d9c62_f531.jpg)
EM-346 BRUSHLESS DC-MOTOR DRIVER 12-35V 10A
- ONLY to the motors with hall sensors
- Three phase output
- Speed and torque adjustment
- Open/closed loop modes
- Regenerative braking option
- True 4Q-power stage
- Braking resistor output
- Current limit and trip
- Symmetrical control option ±5V or ±10V
- Fault and overcurrent outputs
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- Rpm-pulse output option
- New in firmware version v1.4
- + improved closed loop features ( param. 1)
- + new operating mode options ( param. 11)
- + one option added disable input ( param. 14 )
- + control for magnetic brake ( param. 18 )
![EM-346-48V Brushless Driver](/files/cache/2f5b1bf9514db1c9aa49e6cf350d9c62_f531.jpg)
EM-346-48V BRUSHLESS DC-MOTOR DRIVER 24-48V 10A
- ONLY to the motors with hall sensors
- Three phase output
- Speed and torque adjustment
- Open/closed loop modes
- Regenerative braking option
- True 4Q-power stage
- Braking resistor output
- Current limit and trip
- Symmetrical control option ±5V or ±10V
- Fault and overcurrent outputs
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- Rpm-pulse output option
- New in firmware version v1.4
- + improved closed loop features ( param. 1)
- + new operating mode options ( param. 11)
- + one option added disable input ( param. 14 )
- + control for magnetic brake ( param. 18 )
![EM-347A Brushless Driver](/files/cache/cd4ec4918137a3c63339d1a95f35328d_f571.jpg)
EM-347A BRUSHLESS DC-MOTOR DRIVER 12-36V 55A EM-347A-fan 12-36V 70A
- ONLY to the motors with hall sensors
- Three phase output
- Speed and torgue adjustment
- Open/closed loop modes
- Dynamic braking
- Control output for cooling fan.
- True 4Q-power stage
- Braking resistor output
- Selectable brake mode
- Current limit and trip
- Symmetrical control option ±5V or ±10V
- Fault and overcurrent outputs
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- Rpm-pulse output option
- A-version has 20% improved output current
- A-version available with integrated fan
- Firmware v1.4 extended control opt. par. 11
- Firmware v1.9 options added to par. 14 and 17
![EM-347B Brushless with Modbus Motor Driver](/files/cache/d35cb0ab72e419c1af53c0bd1d46a819_f575.jpg)
EM-347B BRUSHLESS with MODBUS( BLDC ) MOTOR DRIVER 12-48V 50A
- Only to the motors with HALL sensors
- motors 12V recom. up to 800W
- motors 24V recom. up to 1200W
- motors 48V recom. up to 1600W
- Three phase output
- Speed and torgue adjustment
- Open/closed loop modes
- Dynamic braking
- Control output for cooling fan.
- True 4Q-power stage
- Braking resistor output
- Selectable brake mode
- Current limit and trip
- Symmetrical control option ±5V or ±10V
- Fault and overcurrent outputs
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- Rpm-pulse output option
- B-board has extended voltage range
- B-board has shutdown input for idle reduction
- B-board replaced earlier A-versions ( all voltage )
- B-board has Rs-485 port ( Modbus RTU )
- B-board support B version firmwares
- B-version HW and SW offer special stop modes
- B-version board v3 support hold current option
- Prog. v1.8 param. 21 added "hold current"
- Prog v1.9 Im zero calib. added, param. 1 =3
- Prog v1.9 magn brake "slow" added to param. 1
![EM-356B Brushless DC-Motor Driver with Modbus](/files/cache/eface7251538f1921bfc09992ec0fbfe_f680.jpg)
EM-356B BRUSHLESS DC-MOTOR DRIVER 12-35V 15A ( 20A )
- Only for motors with Hall sensors
- Speed and torgue adjustment
- Open/closed loop modes
- Regenerative braking option
- Braking resistor output
- Fan control output
- For motors up to 100W @ 12V,
- and 200W@ 24V
- Current limit and trip
- Indication output option
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- Firmvare v1.0 or later
- Rs-485 Modbus control option
- Firmware v1.7 or later
- Added input functions, par. 11,13, 20
- Added power on mode, parameter 15
![EM-356B-SBL Brushless Positioning Driver with Modbus](/files/cache/eface7251538f1921bfc09992ec0fbfe_f680.jpg)
EM-356B-SBL BRUSHLESS DC-MOTOR DRIVER 12-24V 15/20A POSITIONING and MODBUS
- ONLY to the motors with hall sensors
- Three phase output
- Speed and torgue adjustment
- Rs-485 Modbus cont. option
- Servo amplifier for positioning
- Regenerative braking option
- Position counter 31bit
- True 4Q-power stage
- Braking resistor output
- Fan control output
- Output current 25A with fan
- Current limit and trip
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- EM-356B-SBL replaces earlier EM-356A-SBL
- EM-356B works -B version or later firmwares
- v1.8 improved position counter freq.
- v1.8 improved currrent limit features
- v1.8 added param. 19 "start level"
![EM-366 Brushless DC-Motor Driver with Modbus](/files/cache/a7bfbde2d5a1aaead1fa5d6cdcb6fda7_f688.jpg)
EM-366 BRUSHLESS DC-MOTOR DRIVER 12-48V 30/25A
- Only for motors with Hall sensors
- Speed and torgue adjustment
- Open/closed loop modes
- Regenerative braking option
- Braking resistor output
- Fan control output
- For motors up to 200W @12V
- 300W @ 24V and 400W @ 48V
- Current limit and trip
- Indication output option
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- Firmvare v1.0 or later
- Rs-485 Modbus control option
- Firmware v1.7 or later
- Added input functions, par. 11,13, 20
- Added power on mode, parameter 15
![EM-366-SBL Brushless DC-Motor Driver with Modbus](/files/cache/a7bfbde2d5a1aaead1fa5d6cdcb6fda7_f688.jpg)
EM-366-SBL BRUSHLESS DC-MOTOR DRIVER 12-48V 30/25A POSITIONING and MODBUS
- ONLY to the motors with hall sensors
- Three phase output
- Speed and torgue adjustment
- Analog or Rs-485 Modbus control
- Servo amplifier for positioning
- Regenerative braking option
- Position counter 31bit
- True 4Q-power stage
- Braking resistor output
- Fan control output
- Output current up to 30A
- Current limit and trip
- Good efficiency
- Low EMC emissions
- DIN-rail mountable
- Firmware v1.6 added features
- current limitation smoothed
- counter max . freq. increased
- start level added, param. 19