EM-160 DC-MOTOR SERVOCONTROLLER 12-32V 12A 4-QUAD
NOT RECOMMENDED FOR NEW PROJECTS, SEE EM-243-SAF
EM-160 is a motor controller for permanent magnet DC-motors. The unit is primarily designed for positioning usage, where position information is derived from potentiometer or as voltage, for example spindlemotors equipped with potentiometers.
The unit is so called four quadrant controller, in other words it drives and brakes in both directions. The braking is regenerative by nature as it feeds braking energy back to power source. If the power source is not a battery the unit will feed braking energy to motors internal resistance. EM-160 has a window comparator, which measures the diffirence between feedback and reference value and uses this to control the motor. The unit has an adjustable positioning window, that specifies the level of diffirence to occur for correction to take place, in other words the precision of positioning. Range and zero -trims can be used to match the reference value with feedback value. Using the start level adjustment the minimum motor voltage can be suited for the application. Too low start level will result in motor warming and increased current consumption as a consiquence of the motor not being able to perform small corrections due to lack of power. Too high start level will cause too rapid corrections or oscillation.
Motor current can be limited using motor current adjustment. It is possible to switch current limit into so called trip mode in which current limitation will switch off drive. If the current limit has been exceeded for one second, the unit won’t be active until driven into opposite direction.
The power stage is protected against voltage peaks, overload and momentary shortcut. Reversed polarity connection should be avoided even though the unit is equipped with a fuse.
|Idle current||< 30mA|
|Load capacity||12A “ATO”|
|20A mom. ( 8s/30s )|
|25A mom. ( 2s/30s )|
|Operating freq.||approx. 22kHz|
|Trip-indication output||NPN -open coll.|
|30V / 100mA|
|Input imp.||pins 6 and 9 = 50kohm|
|pin 8 = 35kohm|
|Dimensions||( 88 x 72 x 30 ) mm|
- EN_em-160.pdf - Download product file (95 kb)
- 68 pcs. in stock
89,00 € /unit