gbfisedeesfritpt

DC motor controllers <10A

Product files

Items under this category

EM-101 DC-Motor Controller

EM-101 DC-MOTOR CONTROLLER 24V 3A 4-QUAD

  • 4-quadrant
  • Protection with self recovering fuse
  • Settable current limit
  • Settable acceleration/brake ramp
  • Load compensation
  • Special braking options
  • Supply voltage compensation
  • Continuous / 2-step speed controlling
  • Positive driving logic
  • Mounting with DIN-rail or screws
  • High efficiency
EM-101-BI DC-Motor Controller

EM-101-BI MOTOR CONTROLLER 24V 4A 4-QUAD

  • 4 Quadrants
  • Self recovery fuse
  • Adjustable current limit
  • Adjustable accel./braking ramp
  • Load compensation
  • Special braking options
  • Supply voltage compensation
  • Speed control ±10V ( ±5V )
  • Positive control logic
  • Mounting with DIN-rail or screws
  • High efficiency
EM-12A DC-Motor Controller

EM-12A PWM DC-MOTOR CONTROL UNIT 24V 8A 200W

  • Continuous power regulation and controlled direction change
  • Adjustable current limit, acceleration ramp and max. power limit
  • Load short circuit protected
  • CB-mode for increased starting torque
  • High efficiency, small size
  • Controllable with potentiometer, switch or voltage signal
  • Rail mounting base available
EM-140A DC-Motor Starter

EM-140A DC-MOTOR STARTER 12-24V 8A

  • Controlled direction change
  • Soft startup, ramp
  • Trip or continuous current limit mode
  • Settable current limit
  • High efficiency
  • High momentary load capasity
  • Rail mounting base fittable
  • Current limit indication
  • Replaces models EM-140, EM-140-12 and EM-140ind
EM-170 DC-Motor Controller

EM-170 DC-MOTOR CONTROLLER 12-24V 1.5A

  • 4-quadrants
  • controlled direction change
  • brake
  • adjustable current limit
  • acceleration and deceleration ramp
  • dip-switch settable
  • EMC-tested
EM-174A DC-Motor Driver

EM-174A DC-MOTOR DRIVER 12/24Vdc 8A

  • Bidirectional
  • No brake
  • Controlled direction change
  • ± 10 V or 0...10 V control
  • Soft start ramp
  • Adjustable current limit
  • Load compensation
  • High efficiency
  • High peak loading
  • Rail base fittable
EM-175 DC-Motor Controller

EM-175 DC-MOTOR CONTROLLER 12/24Vdc 10A

  • Unidirectional
  • 2-quadrant, drive and brake
  • Dynamic and regenerative braking
  • Smooth startup ramp
  • Adjustable current limit
  • Load compensation
  • High efficiency
  • High peak loading capacity
  • Rail mountable
EM-176A DC-Motor Controller

EM-176A DC-MOTOR CONTROLLER 12/24Vdc 10A

  • 4 Quadrants
  • Braking
  • Freewheeling
  • Reversal
  • 0...10V control
  • Optional ±10V control
  • Soft start ramp
  • Adjustable current limit
  • Load compensation ( RxI )
  • High efficiency
  • High peak loading capacity
  • Rail mountable
EM-180 DC-Motor Driver

EM-180 ON-OFF DC-MOTOR DRIVER 12/24Vdc 10A

  • Fast change of direction
  • Soft start-up, acceleration ramp
  • Settable current limit
  • Trip or continuous current limit
  • High efficiency
  • Dynamic braking
  • High momentary load capacity
  • Rail base fittable
  • Freewheel option
  • Two control modes
EM-180A DC-Motor Starter

EM-180A DC-MOTOR STARTER 12/24V 10A

  • Fast change of direction
  • Soft start-up, acceleration ramp
  • Settable current limit
  • Trip or continuous current limit
  • High efficiency
  • Low RF emissions ( EMC )
  • Dynamic braking
  • Low idle current ( sleep mode option )
  • High momentary load capacity
  • Continuous or impulse mode control
  • NPN or PNP control possibility
  • rail base mountable
  • EM-180A replaces EM-180
  • -A model has extra features added
  • -impulse control mode
  • -extended ramp time up to 3s.
  • -selectable soft or rattle start
EM-180A-M1 DC-Motor Starter

EM-180A-M1 DC-MOTOR STARTER 12/24V 5A

  • Fast change of direction
  • Soft start-up, acceleration ramp
  • Settable current limit
  • Trip or continuous current limit
  • High efficiency
  • Low RF emissions ( EMC )
  • Dynamic braking
  • Low idle current ( sleep mode option )
  • High momentary load capacity
  • Continuous or impulse mode control
  • NPN or PNP control possibility
  • rail base mountable
  • EM-180A-M1 replaces EM-180M1
  • -A model has extra features added
  • -impulse control mode
  • -extended ramp time up to 3s.
  • -selectable soft or rattle start
EM-185A DC-Motor Speed Regulator

EM-185A DC-MOTOR SPEED REGULATOR 12/24Vdc 3A

  • 1-quadrant
  • Panel mountable
  • Small size
  • Motor size 5-80W
  • Good speed regulation
  • Load comp. adjustable RxI
  • Adjustable current limit
  • EMC tested (CE marked)
  • EM-185A replaces EM-185
  • Changes in the wiring instruction
EM-213 DC-Motor Power Controller

EM-213 1-QUADRANT POWER CONTROLLER 12-24Vdc 10A

  • Low cost
  • High efficiency
  • Operating voltage compensated
  • For resistive or inductive loads
  • Applications: motor speed control, lamp dimmer
  • Rail base fittable
EM-241C-48V DC-Motor Controller

EM-241C-48V DC-MOTOR CONTROLLER 24-48V 10A

  • small size
  • high current output
  • current limit
  • zero current limit
  • overvoltage brake
  • speed setting
  • flexible control inputs
  • impulse / continuous mode
  • rail base mountable
  • digital parameter setting
  • 48V version of EM-241C
  • current limit setting input ( new )
  • freewheel options ( new )
  • 2 or 16kHz PWM freq. ( new )
EM-28 DC-Motor Controller

EM-28 DC-MOTOR CONTROL UNIT 12-24V 3A

  • 4-quadrative operation
  • Continuous / 2-step speed control
  • Adjustable current limit
  • Logic inputs for presettable speed
  • RI-adjust for load compensation
  • Selectable rundown mode, braking /
  • flywheeling
  • High efficiency
  • Din-rail mountable
EM-323 1-Quadrant Power Controller

EM-323 1-Quadrant Power Controller

  • One direction, 1 quarant drive
  • Good speed regulation
  • Current limit
  • RxI load compensation
  • Low cost
EM-324C DC-Motor Controller

EM-324C DC-MOTOR CONTROLLER 12-24V 3/4A

  • small size
  • high current output
  • current limit
  • zero current limit
  • overvoltage brake
  • speed setting
  • flexible control inputs
  • impulse / continuous mode
  • rail base mountable
  • 2KHz or 16kHz pwm frequency
  • for motor 5-50W
  • digital parameter setting
  • Molex connector option available
  • prog. v1.9 param. 21 and 22 added
  • ( serial communication )
EM-324C-JS1 DC-Motor Controller

EM-324C-JS1 DC-MOTOR CONTROLLER 12-24V 3/4A

  • JS1 is specially for joystick use
  • three point calibration
  • small size
  • high current output
  • current limit
  • overvoltage brake
  • own speed ranges for FW and REV.
  • rail base mountable
  • digital parameter setting
  • 2KHz or 16kHz pwm frequency
  • for motor 5-50W
  • JS1 program can be update
  • also for standard EM-324 board
EM-67 DC-Motor Controller

EM-67 DC-MOTOR CONTROLLER 24V 3A

  • Direction change
  • Braking
  • Continuous / 2-step speed control
  • Adjustable acceleration / braking ramp
  • Adjustable current limit
  • Adjustable load compensation
  • Supply voltage variation compensated
  • High efficiency
  • Self recovery fuse
  • Rail mountable
EM-76 DC-Motor Controller

EM-76 DC POWER CONTROLLER

  • Panel mounted
  • Adjustable initial level
  • For inductive loads ( motor / coils )
  • Small size
  • High efficiency >90%
  • Power range 2-100 W
  • EMC-tested ( CE )
  • Overload and short circuit protected
EM-A24-PCI DC Motor Driver

EM-A24-PCI DC Motor Driver Module

  • EM-A24-PCI is a DC-motor driver module.
  • Inbuilt RS-485 half Dublex Bus.
  • Modbus RTU.
  • It's based on EM-241 driver card.
  • This module has effective H-bridge power stage.
EM-A24C DC Motor Driver

EM-A24C DC Motor Driver Module

  • EM-A24 is a DC-motor driver module.
  • It's based on EM-241 driver card.
  • This module is PCB mountable.
  • This module has effective H-bridge power stage.
EM-A24C-JS1 DC-Motor Driver

EM-A24C-JS1 DC Motor Driver Module

  • EM-A24 is a DC-motor driver module.
  • It's based on EM-241 driver card.
  • This module is PCB mountable.
  • This module has effective H-bridge power stage.