gbfisedeesfritpt

EM-A24-SPF-PCI DC-Motor Driver module With Positioning Pulse Feedback

Product not available for online order.

EM-A24 is a DC-motor driver module, It's based on EM-241 driver card. This module is
PCB mountable with PCI express 98 connector and it needs a very small pcb area,
because it will be installed vertically. This module has effective H-bridge power stage. The power stage has low EMC emission and it can meet EMC directives for industry and household enviroments without external components. This is big benefit when integrated this module to the "motherboard". Module has two pwm frequency option 2kHz offer more current, and 16kHz is noiseless. The board version v4 and later has added Rs-485 bus. This bus can be used to control, monitoring and also parameter setting for device.


EM-A24-SPF-PCITECHNICAL DATA
Supply voltage cont. max. 10-35V
Overvoltage limit adjustable 15-40V ( connect motor to freewheel )
Overvoltage dynamic brake 40V ( shorting motor poles )
Start up voltage 9V, shutdown voltage 8V
Continuous current output when ambient temp. is < 50°C
12A at 100% speed / 7A at 5-99% speed ( pwm freq. 2kHz )
8A at 100%speed / 4A at 5-99% speed ( pwm freg 16kHz )
Peak current ( 5s. ) 30A at 2kHz / 25A at 16khz
Current limit adjustable 0.1-25A ( at start max. 30A )
Overheat limit 100°C
Start and stop ramp adjustable 0-5s
PWM frequency 2kHz / 16kHz ( selectable )
Positionh set input scale. max. 0-5.5V
Input control logic: high =4-30V, low=0-1V
Control input impedances typ. 47kohm
Pulse input impedance. typ 10kohm.
Pulse input freq. max. 800Hz / pulse line
Control input response time typ 5ms.
Fault out. NPN open coll. max 30V / 50mA
Fault in actives Uin < 1V ( NPN )
Dimensions as is drawing above
CE-tested for industrial environment ( emc )
Operating temp ( Ta ) -40...60°C
Weight 15g

Product files

Product not available for online order.